You can see berms at the back (north end) of the roof to channel collected water from the roof into the cisterns. The ducting to accomplish this collection is not shown. The two cylinders behind the earthship are the cisterns. (I am so excited!!)
I will be updating the drawings on this page as I continue to update the building plans.
I had hoped to include PDF files of the drawings, but I am having problems uploading PDF’s to the server. In the interim I have included the drawings as JPEG’s.
The plan set consists of the following six drawings:
Perspectives
Floor Plan – Main
Floor Plan – Foundation
Roof
Elevations – East and West
Elevations – North and SouthGray Water
This is the first draft of our earthship’s plan set!
This plan set is unfinished but it does give an idea of the direction the plans are heading.
The drawings are incomplete and not entirely consistent.
Over the coming weeks I will be updating these plans as I finalize our plans for submission to our local building authority.
Revisions
Feb 17, 2009 Modified floorplan and foundation pages with new bathroom layout.
Feb 19, 2009 Continued to update all pages. Still have not done engineering on plans. I think I am going to have to add additional pages for gray water and plumbing.
March 4, 2009 Submitted plan set to the Thompson Nicola Regional District Building Department. I added a page for gray water design, added additional details on the roof page for water collection, and made many changes on the other pages. We were told to expect somewhere around two weeks for review of the plans. This is exciting …
Nov 10, 2014 Bear in mind these plan pages shown here are out-of-date and incomplete … more accurate pages are listed here … but I am not claiming that any of the plans shown on-line are a completely accurate reflection of our as-built earthship.
Being a mechanic, machinist, and now a solidfuel specialist,
(glorafied chimney sweep)I have a few concerns that should be considered….in the last 50 or so years we have seen tires used for all sorts of things after their usfullness as tires…swings, garden boxes, and now as walls on the inside of homes…my main concern is tires are very close to the brakes…brakes untill recently are made from Asbestos…nano particles of Asbestos are imbeded by the billions…one needs to take this into consideration before useing them….construction consists of beating the hell out of them to compress the dirt…durring that time brake dust is flying every where…then they are put in the house…a closed living quarters that could be potentialy filled with abestose dust….something to be considered…exspecialy exposing children to such things.
a away to over come this problem may be to put them in a parts washer or presure washer of some sort…is there any way to take a Asbestos reading?
cantransam@aol.com
Hi,
Just responding to the health concerns regarding tires …
A number of studies have been done regarding the health concerns of using tires as a building material. Some of these are available at Earthship Biotecture (http://www.earthship.net/).
I am not aware of any studies that have identified health concerns with the use of tires as a construction material.
I tend to look at it practically; this construction method has been used since the early seventies with good success, and no problems have been identified.
Are there risks with using tires? None have been identified, but some may be over time. We take calculated risks all the time, we simply do not realize it. For example, very few people question many of the engineered products used in construction today, and their potential risks.
I have yet to see a compelling concern raised over the use of tires.